Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization

Leonel Esteban Flores Iza; Manuel Dario Jaramillo Monge; Wilson David Pavon Vallejos

doi:10.1109/ICECCME55909.2022.9988157

Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization

Leonel Esteban Flores Iza, Manuel Dario Jaramillo Monge, Wilson David Pavon Vallejos

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución de conferencia › revisión exhaustiva

1 Cita (Scopus)

Resumen

This research aims to improve the power factor in a distribution electrical power system through the use of particle swarm optimization in order to find the optimal bus bar location for a distributed static synchronous compensator D-STATCOM by considering as a restriction not modified any other electrical parameter in the system. As a case study the IEEE 34 bus bar system is analysed in which first a base analysis of all power factors in each area of the system is performed, then the D-STATCOM is connected in every single bus bar to analyze all possible scenarios of compensation which will be the raw data to use and analyze with the optimization function. Finally, particle swarm optimization is implemented and the optimal global location for the location of the distributed static synchronous compensator is determined.

Idioma original	Inglés
Título de la publicación alojada	International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022
Editorial	Institute of Electrical and Electronics Engineers Inc.
ISBN (versión digital)	9781665470957
DOI	https://doi.org/10.1109/ICECCME55909.2022.9988157
Estado	Publicada - 2022
Evento	2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022 - Male, Maldivas Duración: 16 nov. 2022 → 18 nov. 2022

Serie de la publicación

Nombre	International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022

Conferencia

Conferencia	2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022
País/Territorio	Maldivas
Ciudad	Male
Período	16/11/22 → 18/11/22

Nota bibliográfica

Publisher Copyright:
© 2022 IEEE.

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

Acceder al documento

10.1109/ICECCME55909.2022.9988157

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Flores Iza, L. E., Monge, M. D. J., & Vallejos, W. D. P. (2022). Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization. En International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022 (International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICECCME55909.2022.9988157

Flores Iza, Leonel Esteban ; Monge, Manuel Dario Jaramillo ; Vallejos, Wilson David Pavon. / Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization. International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022. Institute of Electrical and Electronics Engineers Inc., 2022. (International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022).

@inproceedings{6d85bfccdb514be1af78e2355f00e901,

title = "Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization",

abstract = "This research aims to improve the power factor in a distribution electrical power system through the use of particle swarm optimization in order to find the optimal bus bar location for a distributed static synchronous compensator D-STATCOM by considering as a restriction not modified any other electrical parameter in the system. As a case study the IEEE 34 bus bar system is analysed in which first a base analysis of all power factors in each area of the system is performed, then the D-STATCOM is connected in every single bus bar to analyze all possible scenarios of compensation which will be the raw data to use and analyze with the optimization function. Finally, particle swarm optimization is implemented and the optimal global location for the location of the distributed static synchronous compensator is determined.",

keywords = "Distributed Generation, Distribution System with Distributed Generation, Line Loading, Renewable Resources",

author = "{Flores Iza}, {Leonel Esteban} and Monge, {Manuel Dario Jaramillo} and Vallejos, {Wilson David Pavon}",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022 ; Conference date: 16-11-2022 Through 18-11-2022",

year = "2022",

doi = "10.1109/ICECCME55909.2022.9988157",

language = "English",

series = "International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022",

address = "United States",

}

Flores Iza, LE, Monge, MDJ & Vallejos, WDP 2022, Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization. En International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022. International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022, Institute of Electrical and Electronics Engineers Inc., 2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022, Male, Maldivas, 16/11/22. https://doi.org/10.1109/ICECCME55909.2022.9988157

Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization. / Flores Iza, Leonel Esteban; Monge, Manuel Dario Jaramillo ; Vallejos, Wilson David Pavon.
International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022. Institute of Electrical and Electronics Engineers Inc., 2022. (International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución de conferencia › revisión exhaustiva

TY - GEN

T1 - Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization

AU - Flores Iza, Leonel Esteban

AU - Monge, Manuel Dario Jaramillo

AU - Vallejos, Wilson David Pavon

PY - 2022

Y1 - 2022

N2 - This research aims to improve the power factor in a distribution electrical power system through the use of particle swarm optimization in order to find the optimal bus bar location for a distributed static synchronous compensator D-STATCOM by considering as a restriction not modified any other electrical parameter in the system. As a case study the IEEE 34 bus bar system is analysed in which first a base analysis of all power factors in each area of the system is performed, then the D-STATCOM is connected in every single bus bar to analyze all possible scenarios of compensation which will be the raw data to use and analyze with the optimization function. Finally, particle swarm optimization is implemented and the optimal global location for the location of the distributed static synchronous compensator is determined.

AB - This research aims to improve the power factor in a distribution electrical power system through the use of particle swarm optimization in order to find the optimal bus bar location for a distributed static synchronous compensator D-STATCOM by considering as a restriction not modified any other electrical parameter in the system. As a case study the IEEE 34 bus bar system is analysed in which first a base analysis of all power factors in each area of the system is performed, then the D-STATCOM is connected in every single bus bar to analyze all possible scenarios of compensation which will be the raw data to use and analyze with the optimization function. Finally, particle swarm optimization is implemented and the optimal global location for the location of the distributed static synchronous compensator is determined.

KW - Distributed Generation

KW - Distribution System with Distributed Generation

KW - Line Loading

KW - Renewable Resources

UR - http://www.scopus.com/inward/record.url?scp=85146423420&partnerID=8YFLogxK

U2 - 10.1109/ICECCME55909.2022.9988157

DO - 10.1109/ICECCME55909.2022.9988157

M3 - Conference contribution

AN - SCOPUS:85146423420

T3 - International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022

BT - International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022

Y2 - 16 November 2022 through 18 November 2022

ER -

Flores Iza LE, Monge MDJ , Vallejos WDP. Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization. En International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022. Institute of Electrical and Electronics Engineers Inc. 2022. (International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022). doi: 10.1109/ICECCME55909.2022.9988157

Power factor improvement through optimal placement and sizing of D-STATCOM using particle swarming optimization

Resumen

Serie de la publicación

Conferencia

Nota bibliográfica

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto