TY - JOUR
T1 - Study of the Variation of Fuel Pressure to Improve Spraying and the Range of the Injection Jet
AU - Rojas-Reinoso, Vicente
AU - Duque-Escobar, Stalin
AU - Guapulema Guapulema, Christian
AU - Soriano, José Antonio
N1 - Publisher Copyright:
© 2023 by the authors.
PY - 2023/7
Y1 - 2023/7
N2 - The current study is focused on how varying injection pressure in the fuel supply system of multi-point injection systems can improve fuel atomization and injection jet range. The aim is to achieve a more efficient mix dosage, thus improving combustion and reducing exhaust emissions. In addition, it is intended to develop a characterization of the injection actuators, specifically the injectors, through a series of tests in which the injector pressure, engine speed and injection pulse are modified. To carry out these tests, a heuristic testing technique, like the empirical approach, was implemented, and a mobile device was used to capture the spray frames of the injectors. These data were then used to generate a correlation model between injection and spray angles, considering 0.5 bar pressure variation intervals within the established ranges. This approach made it possible to visualize and record the behavior of the spray in the injector, including the spray angle, the injected fuel flow rate and the working pressure during the operation process. Following the guidelines established in the proposed methodology, a significant result was obtained by varying the pressure at 5 bar and with an injection pulse of 2 ms. In this case, a flow reduction of 66 mL of the injected fluid was achieved, which corresponds to a significant reduction in fuel consumption. Additionally, a spray angle of 10.48° was observed with optimized atomization. These results were verified on vehicles with similar injection systems by testing on the GT-600-PRO injection test bench. In summary, this study shows that by varying the injection pressure and optimizing other parameters, it is possible to achieve a significant reduction in fuel consumption and improve fuel atomization in multipoint injection systems. These findings have a significant impact on the Ecuadorian vehicle fleet and provide a scientific approach to improving fuel efficiency and performance.
AB - The current study is focused on how varying injection pressure in the fuel supply system of multi-point injection systems can improve fuel atomization and injection jet range. The aim is to achieve a more efficient mix dosage, thus improving combustion and reducing exhaust emissions. In addition, it is intended to develop a characterization of the injection actuators, specifically the injectors, through a series of tests in which the injector pressure, engine speed and injection pulse are modified. To carry out these tests, a heuristic testing technique, like the empirical approach, was implemented, and a mobile device was used to capture the spray frames of the injectors. These data were then used to generate a correlation model between injection and spray angles, considering 0.5 bar pressure variation intervals within the established ranges. This approach made it possible to visualize and record the behavior of the spray in the injector, including the spray angle, the injected fuel flow rate and the working pressure during the operation process. Following the guidelines established in the proposed methodology, a significant result was obtained by varying the pressure at 5 bar and with an injection pulse of 2 ms. In this case, a flow reduction of 66 mL of the injected fluid was achieved, which corresponds to a significant reduction in fuel consumption. Additionally, a spray angle of 10.48° was observed with optimized atomization. These results were verified on vehicles with similar injection systems by testing on the GT-600-PRO injection test bench. In summary, this study shows that by varying the injection pressure and optimizing other parameters, it is possible to achieve a significant reduction in fuel consumption and improve fuel atomization in multipoint injection systems. These findings have a significant impact on the Ecuadorian vehicle fleet and provide a scientific approach to improving fuel efficiency and performance.
KW - dosage
KW - heuristic assay
KW - injection angle
KW - injection jet
KW - injection strategies
KW - multi-point injection systems
KW - pressure variation
KW - spray angle
UR - http://www.scopus.com/inward/record.url?scp=85166225245&partnerID=8YFLogxK
U2 - 10.3390/en16145472
DO - 10.3390/en16145472
M3 - Article
AN - SCOPUS:85166225245
SN - 1996-1073
VL - 16
JO - Energies
JF - Energies
IS - 14
M1 - 5472
ER -
