Obtaining a Gypsum-cement Blend, to be Used as Filling, with Low Hardening Temperature

Gabriela Blanca Abad Farfan; Tito Fernando Muñoz Cuenca; Paul Bolivar Torres Jara; Efren Vazquez Silva

doi:10.11648/j.am.20170606.12

Obtaining a Gypsum-cement Blend, to be Used as Filling, with Low Hardening Temperature

Título traducido de la contribución: Obtención de una mezcla de yeso-cemento, para uso como relleno, con baja temperatura de endurecimiento

Gabriela Blanca Abad Farfan, Tito Fernando Muñoz Cuenca, Paul Bolivar Torres Jara, Efren Vazquez Silva

Producción científica: Contribución a una revista › Artículo

Resumen

Cuando una viga, fabricada con material cuyas propiedades se verían afectadas a temperaturas superiores a 37 ° C y con geometría irregular en sus extremos, sea sometida a un ensayo de flexión; es necesario garantizar la estabilidad de sus puntos de apoyo para lograr el éxito en la ejecución de la prueba. En este trabajo se presenta un estudio sobre las propiedades de un determinado material compuesto que se utiliza como relleno de determinados soportes huecos con el objetivo de dar estabilidad a los extremos de la viga cuando se aplica la carga. Aunque la mezcla empleada reacciona exotérmicamente, no supera el nivel máximo de temperatura por encima del cual se verían afectadas las propiedades mecánicas del material constituyente de la viga. Además, la resistencia de la mezcla es tal que es capaz de soportar las tensiones de compresión que se generan durante la prueba.

Título traducido de la contribución	Obtención de una mezcla de yeso-cemento, para uso como relleno, con baja temperatura de endurecimiento
Idioma original	Inglés estadounidense
Páginas (desde-hasta)	1-7
Número de páginas	7
Publicación	Advances In Materials
Volumen	6
N.º	6
DOI	https://doi.org/10.11648/j.am.20170606.12
Estado	Publicada - 7 nov. 2017

Palabras clave

Composites
Hardness
Stress measurements

Areas de Conocimiento del CACES

227A Materiales

Acceder al documento

10.11648/j.am.20170606.12

Otros archivos y enlaces

Other Link

Citar esto

@article{5326ae4fb8ec470ebd60363929a4a3f8,

title = "Obtaining a Gypsum-cement Blend, to be Used as Filling, with Low Hardening Temperature",

abstract = "When a beam, made of material whose properties would be affected at temperatures above 37°C and with irregular geometry at its ends, is subjected to a bending test; it is necessary to guarantee the stability of its support points to achieve success in the execution of the test. This paper presents a study on the properties of a particular composite material that is used as a filling for certain hollow supports with the aim to provide stability to the ends of the beam when the load is applied. Although the mixture employed reacts exothermically, it does not exceed the maximum temperature level above which the mechanical properties of the constituent material of the beam would be affected. In addition, the strength of the mixture is such that it is able to withstand the compression stresses that are generated during the test.",

keywords = "Composites, Hardness, Stress measurements, Composites, Hardness, Stress measurements",

author = "{Abad Farfan}, {Gabriela Blanca} and {Mu{\~n}oz Cuenca}, {Tito Fernando} and {Torres Jara}, {Paul Bolivar} and {Vazquez Silva}, Efren",

year = "2017",

month = nov,

day = "7",

doi = "10.11648/j.am.20170606.12",

language = "English (US)",

volume = "6",

pages = "1--7",

journal = "Advances In Materials",

issn = "2327-2503",

number = "6",

}

TY - JOUR

T1 - Obtaining a Gypsum-cement Blend, to be Used as Filling, with Low Hardening Temperature

AU - Abad Farfan, Gabriela Blanca

AU - Muñoz Cuenca, Tito Fernando

AU - Torres Jara, Paul Bolivar

AU - Vazquez Silva, Efren

PY - 2017/11/7

Y1 - 2017/11/7

N2 - When a beam, made of material whose properties would be affected at temperatures above 37°C and with irregular geometry at its ends, is subjected to a bending test; it is necessary to guarantee the stability of its support points to achieve success in the execution of the test. This paper presents a study on the properties of a particular composite material that is used as a filling for certain hollow supports with the aim to provide stability to the ends of the beam when the load is applied. Although the mixture employed reacts exothermically, it does not exceed the maximum temperature level above which the mechanical properties of the constituent material of the beam would be affected. In addition, the strength of the mixture is such that it is able to withstand the compression stresses that are generated during the test.

AB - When a beam, made of material whose properties would be affected at temperatures above 37°C and with irregular geometry at its ends, is subjected to a bending test; it is necessary to guarantee the stability of its support points to achieve success in the execution of the test. This paper presents a study on the properties of a particular composite material that is used as a filling for certain hollow supports with the aim to provide stability to the ends of the beam when the load is applied. Although the mixture employed reacts exothermically, it does not exceed the maximum temperature level above which the mechanical properties of the constituent material of the beam would be affected. In addition, the strength of the mixture is such that it is able to withstand the compression stresses that are generated during the test.

KW - Composites

KW - Hardness

KW - Stress measurements

KW - Composites

KW - Hardness

KW - Stress measurements

UR - http://www.sciencepublishinggroup.com/journal/paperinfo?journalid=129&doi=10.11648/j.am.20170606.12

U2 - 10.11648/j.am.20170606.12

DO - 10.11648/j.am.20170606.12

M3 - Article

SN - 2327-2503

VL - 6

SP - 1

EP - 7

JO - Advances In Materials

JF - Advances In Materials

IS - 6

ER -

Obtaining a Gypsum-cement Blend, to be Used as Filling, with Low Hardening Temperature

Resumen

Palabras clave

Areas de Conocimiento del CACES

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto