Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach

Gustavo Caiza; David Lanas; Juan Lanas-Perez; Luis E. Mayorga; Marcelo V. Garcia

doi:10.1007/978-3-030-42517-3_36

Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach

Gustavo Caiza, David Lanas, Juan Lanas-Perez, Luis E. Mayorga, Marcelo V. Garcia

Grupo de Investigación en Electrónica Control y Automatización (GIECA)

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución de conferencia › revisión exhaustiva

Resumen

Software tools based on finite element analysis are widely used for structural mechanical analysis and even in other areas such as medicine. This research analyzes the efforts that occur in the two most important bones that are part of the knee joint from computerized axial tomography (CT) and proposes a methodology based on finite element meshes to obtain these efforts. From the simulation of the geometry of a real knee, stress-strain curves have been developed. The results obtained from the simulation showed that the stress pattern is at a value of 10.97 Mpa in the area between the intercondylar eminence and the intercondylar notch and a unit strain of 1.05 × 10 − 2 mm for the femur and 8, 5 × 10 − 4 mm in warm.

Idioma original	Inglés
Título de la publicación alojada	Applied Technologies - 1st International Conference, ICAT 2019, Proceedings
Editores	Miguel Botto-Tobar, Marcelo Zambrano Vizuete, Pablo Torres-Carrión, Sergio Montes León, Guillermo Pizarro Vásquez, Benjamin Durakovic
Editorial	Springer
Páginas	480-492
Número de páginas	13
ISBN (versión impresa)	9783030425166
DOI	https://doi.org/10.1007/978-3-030-42517-3_36
Estado	Publicada - 1 ene. 2020
Evento	1st International Conference on Applied Technologies, ICAT 2019 - Quito, Ecuador Duración: 3 dic. 2019 → 5 dic. 2019

Serie de la publicación

Nombre	Communications in Computer and Information Science
Volumen	1193 CCIS
ISSN (versión impresa)	1865-0929
ISSN (versión digital)	1865-0937

Conferencia

Conferencia	1st International Conference on Applied Technologies, ICAT 2019
País/Territorio	Ecuador
Ciudad	Quito
Período	3/12/19 → 5/12/19

Nota bibliográfica

Publisher Copyright:
© 2020, Springer Nature Switzerland AG.

Acceder al documento

10.1007/978-3-030-42517-3_36

Otros archivos y enlaces

Citar esto

Caiza, G., Lanas, D., Lanas-Perez, J., Mayorga, L. E., & Garcia, M. V. (2020). Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach. En M. Botto-Tobar, M. Zambrano Vizuete, P. Torres-Carrión, S. Montes León, G. Pizarro Vásquez, & B. Durakovic (Eds.), Applied Technologies - 1st International Conference, ICAT 2019, Proceedings (pp. 480-492). (Communications in Computer and Information Science; Vol. 1193 CCIS). Springer. https://doi.org/10.1007/978-3-030-42517-3_36

Caiza, Gustavo ; Lanas, David ; Lanas-Perez, Juan et al. / Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach. Applied Technologies - 1st International Conference, ICAT 2019, Proceedings. editor / Miguel Botto-Tobar ; Marcelo Zambrano Vizuete ; Pablo Torres-Carrión ; Sergio Montes León ; Guillermo Pizarro Vásquez ; Benjamin Durakovic. Springer, 2020. pp. 480-492 (Communications in Computer and Information Science).

@inproceedings{5100dd889c024216895627f334c40b91,

title = "Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach",

abstract = "Software tools based on finite element analysis are widely used for structural mechanical analysis and even in other areas such as medicine. This research analyzes the efforts that occur in the two most important bones that are part of the knee joint from computerized axial tomography (CT) and proposes a methodology based on finite element meshes to obtain these efforts. From the simulation of the geometry of a real knee, stress-strain curves have been developed. The results obtained from the simulation showed that the stress pattern is at a value of 10.97 Mpa in the area between the intercondylar eminence and the intercondylar notch and a unit strain of 1.05 × 10 − 2 mm for the femur and 8, 5 × 10 − 4 mm in warm.",

keywords = "Articulation, Computed axial tomography (CT), Finite elements, Strain, Stress",

author = "Gustavo Caiza and David Lanas and Juan Lanas-Perez and Mayorga, {Luis E.} and Garcia, {Marcelo V.}",

note = "Publisher Copyright: {\textcopyright} 2020, Springer Nature Switzerland AG.; 1st International Conference on Applied Technologies, ICAT 2019 ; Conference date: 03-12-2019 Through 05-12-2019",

year = "2020",

month = jan,

day = "1",

doi = "10.1007/978-3-030-42517-3_36",

language = "English",

isbn = "9783030425166",

series = "Communications in Computer and Information Science",

publisher = "Springer",

pages = "480--492",

editor = "Miguel Botto-Tobar and {Zambrano Vizuete}, Marcelo and Pablo Torres-Carri{\'o}n and {Montes Le{\'o}n}, Sergio and {Pizarro V{\'a}squez}, Guillermo and Benjamin Durakovic",

booktitle = "Applied Technologies - 1st International Conference, ICAT 2019, Proceedings",

}

Caiza, G, Lanas, D, Lanas-Perez, J, Mayorga, LE & Garcia, MV 2020, Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach. En M Botto-Tobar, M Zambrano Vizuete, P Torres-Carrión, S Montes León, G Pizarro Vásquez & B Durakovic (eds.), Applied Technologies - 1st International Conference, ICAT 2019, Proceedings. Communications in Computer and Information Science, vol. 1193 CCIS, Springer, pp. 480-492, 1st International Conference on Applied Technologies, ICAT 2019, Quito, Ecuador, 3/12/19. https://doi.org/10.1007/978-3-030-42517-3_36

Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach. / Caiza, Gustavo; Lanas, David; Lanas-Perez, Juan et al.
Applied Technologies - 1st International Conference, ICAT 2019, Proceedings. ed. / Miguel Botto-Tobar; Marcelo Zambrano Vizuete; Pablo Torres-Carrión; Sergio Montes León; Guillermo Pizarro Vásquez; Benjamin Durakovic. Springer, 2020. p. 480-492 (Communications in Computer and Information Science; Vol. 1193 CCIS).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución de conferencia › revisión exhaustiva

TY - GEN

T1 - Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach

AU - Caiza, Gustavo

AU - Lanas, David

AU - Lanas-Perez, Juan

AU - Mayorga, Luis E.

AU - Garcia, Marcelo V.

PY - 2020/1/1

Y1 - 2020/1/1

N2 - Software tools based on finite element analysis are widely used for structural mechanical analysis and even in other areas such as medicine. This research analyzes the efforts that occur in the two most important bones that are part of the knee joint from computerized axial tomography (CT) and proposes a methodology based on finite element meshes to obtain these efforts. From the simulation of the geometry of a real knee, stress-strain curves have been developed. The results obtained from the simulation showed that the stress pattern is at a value of 10.97 Mpa in the area between the intercondylar eminence and the intercondylar notch and a unit strain of 1.05 × 10 − 2 mm for the femur and 8, 5 × 10 − 4 mm in warm.

AB - Software tools based on finite element analysis are widely used for structural mechanical analysis and even in other areas such as medicine. This research analyzes the efforts that occur in the two most important bones that are part of the knee joint from computerized axial tomography (CT) and proposes a methodology based on finite element meshes to obtain these efforts. From the simulation of the geometry of a real knee, stress-strain curves have been developed. The results obtained from the simulation showed that the stress pattern is at a value of 10.97 Mpa in the area between the intercondylar eminence and the intercondylar notch and a unit strain of 1.05 × 10 − 2 mm for the femur and 8, 5 × 10 − 4 mm in warm.

KW - Articulation

KW - Computed axial tomography (CT)

KW - Finite elements

KW - Strain

KW - Stress

UR - http://www.scopus.com/inward/record.url?scp=85082387145&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/51d5cae5-aa98-3950-b005-6e6c7954d8b6/

U2 - 10.1007/978-3-030-42517-3_36

DO - 10.1007/978-3-030-42517-3_36

M3 - Conference contribution

AN - SCOPUS:85082387145

SN - 9783030425166

T3 - Communications in Computer and Information Science

SP - 480

EP - 492

BT - Applied Technologies - 1st International Conference, ICAT 2019, Proceedings

A2 - Botto-Tobar, Miguel

A2 - Zambrano Vizuete, Marcelo

A2 - Torres-Carrión, Pablo

A2 - Montes León, Sergio

A2 - Pizarro Vásquez, Guillermo

A2 - Durakovic, Benjamin

PB - Springer

T2 - 1st International Conference on Applied Technologies, ICAT 2019

Y2 - 3 December 2019 through 5 December 2019

ER -

Caiza G, Lanas D, Lanas-Perez J, Mayorga LE, Garcia MV. Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach. En Botto-Tobar M, Zambrano Vizuete M, Torres-Carrión P, Montes León S, Pizarro Vásquez G, Durakovic B, editores, Applied Technologies - 1st International Conference, ICAT 2019, Proceedings. Springer. 2020. p. 480-492. (Communications in Computer and Information Science). doi: 10.1007/978-3-030-42517-3_36

Bio-mechanical Analysis of Knee Stresses Based on Finite Elements Approach

Resumen

Serie de la publicación

Conferencia

Nota bibliográfica

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto