Transmission condition monitoring of 3d printers based on the echo state network

Shaohui Zhang, Kun He, Diego Cabrera, Chuan Li, Yun Bai, Jianyu Long

Producción científica: Contribución a una revistaArtículorevisión exhaustiva

9 Citas (Scopus)

Resumen

Three-dimensional printing quality is critically affected by the transmission condition of 3D printers. A low-cost technique based on the echo state network (ESN) is proposed for transmission condition monitoring of 3D printers. A low-cost attitude sensor installed on a 3D printer was first employed to collect transmission condition monitoring data. To solve the high-dimensional problem of attitude data, feature extraction approaches were subsequently performed. Based on the extracted features, the ESN was finally employed to monitor transmission faults of the 3D printer. Experimental results showed that the fault recognition accuracy of the 3D printer was obtained at 97.17% using the proposed approach. In addition, support vector machine (SVM), locality preserving projection support vector machine (LPPSVM), and principal component analysis support vector machine (PCASVM) were also used for comparison. The contrast results showed that the recognition accuracies of our method were higher and more stable than that of SVM, LPPSVM, and PCASVM when collecting raw data via the low-cost attitude sensor.

Idioma originalInglés
Número de artículo3058
Páginas (desde-hasta)3058
PublicaciónApplied Sciences (Switzerland)
Volumen9
N.º15
DOI
EstadoPublicada - 29 jul. 2019

Huella

Profundice en los temas de investigación de 'Transmission condition monitoring of 3d printers based on the echo state network'. En conjunto forman una huella única.

Citar esto