Parameter Estimation for Deep-Bar Induction Machines Using Instantaneous Stator Measurements From a Direct Startup

Joseph Benzaquen, Johnny Rengifo, Eduardo Albánez, José M. Aller

Producción científica: Contribución a una revistaArtículorevisión exhaustiva

22 Citas (Scopus)

Resumen

A parameter estimation method for deep-bar induction machines is presented. The parameters are estimated using two instantaneous voltage and current waveforms during a direct startup. The instantaneous input impedance is used as a stator indicator to solve a constrained nonlinear optimization problem that outputs the model's parameters. For such purposes, a novel analytical expression for the instantaneous input impedance is introduced. The method is validated in two distinct National Electrical Manufacturers Association (NEMA) design type induction machines (designs A and B), and the accuracy of the obtained parameters is determined by comparing the instantaneous input impedance magnitude and angle errors between the deep-bar and single-cage models with experimental data. The two tested motors showed an improvement when implementing the deep-bar model with the estimated parameters. The error decrease is more significant for the NEMA design B motor which corresponds to a deep-bar rotor construction. Finally, the single-cage and deep-bar models are simulated and their outputs are compared to experimental waveforms. The deep-bar model with the estimated parameters outperforms the single-cage model, showing excellent agreement between the experimental and simulated mechanical speed, stator currents, and electromagnetic torque. The results endorse the accuracy of the method and its applicability for transient studies.

Idioma originalInglés
Número de artículo7831460
Páginas (desde-hasta)516-524
Número de páginas9
PublicaciónIEEE Transactions on Energy Conversion
Volumen32
N.º2
DOI
EstadoPublicada - jun. 2017

Nota bibliográfica

Publisher Copyright:
© 2017 IEEE.

Huella

Profundice en los temas de investigación de 'Parameter Estimation for Deep-Bar Induction Machines Using Instantaneous Stator Measurements From a Direct Startup'. En conjunto forman una huella única.

Citar esto