Influence of the addition of 0.5 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing

C. Cobos; A. Conejero; O. Fenollar; S. Ferrándiz

Influence of the addition of 0.5 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing

C. Cobos, A. Conejero, O. Fenollar, S. Ferrándiz

Grupo de Investigación en Nuevos Materiales y Procesos de Transformacion (GIMaT)

Producción científica: Contribución a una revista › Artículo de la conferencia › revisión exhaustiva

5 Citas (Scopus)

Resumen

This research paper presents the characterization of a nanocomposite of polylactic acid (PLA) and carbon nanotubes (MWCNTs) with different percentages of mixture in weight. This thermal characterization determines the influence carbon nanotubes have when those are added into PLA. This last one been used for additive manufacturing (FFF technology).. Once finished the tests, it was observed that the nanocomposite PLA/MWCNTs have a positive application during 3D printing. The extrusion temperatures used in tests were between 177 and 185°C. The parameters given for the SLISER software, obtained a promising result for the application of a PLA / MWCNT nanocomposite into 3D printing.

Idioma original	Inglés
Páginas (desde-hasta)	875-881
Número de páginas	7
Publicación	Procedia Manufacturing
Volumen	41
Estado	Publicada - 1 ene. 2019
Evento	8th Manufacturing Engineering Society International Conference, MESIC 2019 - Madrid, Espana Duración: 19 jun. 2019 → 21 jun. 2019

Nota bibliográfica

Publisher Copyright:
© 2020 The Authors.

Otros archivos y enlaces

http://www.scopus.com/inward/record.url?scp=85084311573&partnerID=8YFLogxK

Citar esto

@article{99df0f1f0cdf4803b90f5530dfa91791,

title = "Influence of the addition of 0.5 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing",

abstract = "This research paper presents the characterization of a nanocomposite of polylactic acid (PLA) and carbon nanotubes (MWCNTs) with different percentages of mixture in weight. This thermal characterization determines the influence carbon nanotubes have when those are added into PLA. This last one been used for additive manufacturing (FFF technology).. Once finished the tests, it was observed that the nanocomposite PLA/MWCNTs have a positive application during 3D printing. The extrusion temperatures used in tests were between 177 and 185°C. The parameters given for the SLISER software, obtained a promising result for the application of a PLA / MWCNT nanocomposite into 3D printing.",

keywords = "3D printing, FFF, PLA/MWCNT",

author = "C. Cobos and A. Conejero and O. Fenollar and S. Ferr{\'a}ndiz",

note = "Publisher Copyright: {\textcopyright} 2020 The Authors.; 8th Manufacturing Engineering Society International Conference, MESIC 2019 ; Conference date: 19-06-2019 Through 21-06-2019",

year = "2019",

month = jan,

day = "1",

language = "English",

volume = "41",

pages = "875--881",

journal = "Procedia Manufacturing",

issn = "2351-9789",

publisher = "Elsevier BV",

}

TY - JOUR

T1 - Influence of the addition of 0.5 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing

AU - Cobos, C.

AU - Conejero, A.

AU - Fenollar, O.

AU - Ferrándiz, S.

PY - 2019/1/1

Y1 - 2019/1/1

N2 - This research paper presents the characterization of a nanocomposite of polylactic acid (PLA) and carbon nanotubes (MWCNTs) with different percentages of mixture in weight. This thermal characterization determines the influence carbon nanotubes have when those are added into PLA. This last one been used for additive manufacturing (FFF technology).. Once finished the tests, it was observed that the nanocomposite PLA/MWCNTs have a positive application during 3D printing. The extrusion temperatures used in tests were between 177 and 185°C. The parameters given for the SLISER software, obtained a promising result for the application of a PLA / MWCNT nanocomposite into 3D printing.

AB - This research paper presents the characterization of a nanocomposite of polylactic acid (PLA) and carbon nanotubes (MWCNTs) with different percentages of mixture in weight. This thermal characterization determines the influence carbon nanotubes have when those are added into PLA. This last one been used for additive manufacturing (FFF technology).. Once finished the tests, it was observed that the nanocomposite PLA/MWCNTs have a positive application during 3D printing. The extrusion temperatures used in tests were between 177 and 185°C. The parameters given for the SLISER software, obtained a promising result for the application of a PLA / MWCNT nanocomposite into 3D printing.

KW - 3D printing

KW - FFF

KW - PLA/MWCNT

UR - http://www.scopus.com/inward/record.url?scp=85084311573&partnerID=8YFLogxK

M3 - Artículo de la conferencia

AN - SCOPUS:85084311573

SN - 2351-9789

VL - 41

SP - 875

EP - 881

JO - Procedia Manufacturing

JF - Procedia Manufacturing

T2 - 8th Manufacturing Engineering Society International Conference, MESIC 2019

Y2 - 19 June 2019 through 21 June 2019

ER -

Influence of the addition of 0.5 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing

Resumen

Nota bibliográfica

Otros archivos y enlaces

Huella

Citar esto