Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation

Gustavo Caiza; Santiago Chiliquinga; Santiago Manzano; Marcelo V. Garcia

doi:10.1109/INDIN45582.2020.9442180

Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation

Gustavo Caiza, Santiago Chiliquinga, Santiago Manzano, Marcelo V. Garcia

Research Group in Electronics Control and Automation (GIECA)

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

The aim of this research is to design and implement an SDN-IoT testbed, which shows the influence that Software-Defined Networks (SDN) have on the applications of IoT applied to industry 4.0. The IoT-SDN architecture is considered as the basis for the SDN-IoT testbed implementation. The testbed architecture design has three layers: process layer, SDN layer, and IoT application layer. In the process layer, two Industry 4.0 based processes are implemented. In the SDN layer two access points are implemented, a switch, an SDN controller and a firewall application for centralized control of traffic over the network, finally in the layer of IoT application implements a graphical interface that allows to control and monitor the processes of industry 4.0. In the implementation of the SDN, low cost and free code elements are used that are configured to work with the OpenFlow protocol.

Original language	English
Title of host publication	Proceedings - 2020 IEEE 18th International Conference on Industrial Informatics, INDIN 2020
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	587-591
Number of pages	5
ISBN (Electronic)	9781728149646
DOIs	https://doi.org/10.1109/INDIN45582.2020.9442180
State	Published - 20 Jul 2020
Event	18th IEEE International Conference on Industrial Informatics, INDIN 2020 - Virtual, Warwick, United Kingdom Duration: 21 Jul 2020 → 23 Jul 2020

Publication series

Name	IEEE International Conference on Industrial Informatics (INDIN)
Volume	2020-July
ISSN (Print)	1935-4576

Conference

Conference	18th IEEE International Conference on Industrial Informatics, INDIN 2020
Country/Territory	United Kingdom
City	Virtual, Warwick
Period	21/07/20 → 23/07/20

Bibliographical note

Funding Information:
This work was financed by Universidad Tecnica de Am-bato (UTA) and their Research and Development Department (DIDE) under project ”Methodologies design for Fog Computing and Intelligent Controllers based on IEC 61499”.

Publisher Copyright:
© 2020 IEEE.

Keywords

Internet of Things (IoT)
Low-cost automation
OpenFlow
Software-Defined Networks (SDN)

Access to Document

10.1109/INDIN45582.2020.9442180

Cite this

Caiza, G., Chiliquinga, S., Manzano, S., & Garcia, M. V. (2020). Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation. In Proceedings - 2020 IEEE 18th International Conference on Industrial Informatics, INDIN 2020 (pp. 587-591). Article 9442180 (IEEE International Conference on Industrial Informatics (INDIN); Vol. 2020-July). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/INDIN45582.2020.9442180

Caiza, Gustavo ; Chiliquinga, Santiago ; Manzano, Santiago et al. / Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation. Proceedings - 2020 IEEE 18th International Conference on Industrial Informatics, INDIN 2020. Institute of Electrical and Electronics Engineers Inc., 2020. pp. 587-591 (IEEE International Conference on Industrial Informatics (INDIN)).

@inproceedings{6fcea8ad3f99471c86b23983b30fde0f,

title = "Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation",

abstract = "The aim of this research is to design and implement an SDN-IoT testbed, which shows the influence that Software-Defined Networks (SDN) have on the applications of IoT applied to industry 4.0. The IoT-SDN architecture is considered as the basis for the SDN-IoT testbed implementation. The testbed architecture design has three layers: process layer, SDN layer, and IoT application layer. In the process layer, two Industry 4.0 based processes are implemented. In the SDN layer two access points are implemented, a switch, an SDN controller and a firewall application for centralized control of traffic over the network, finally in the layer of IoT application implements a graphical interface that allows to control and monitor the processes of industry 4.0. In the implementation of the SDN, low cost and free code elements are used that are configured to work with the OpenFlow protocol.",

keywords = "Internet of Things (IoT), Low-cost automation, OpenFlow, Software-Defined Networks (SDN)",

author = "Gustavo Caiza and Santiago Chiliquinga and Santiago Manzano and Garcia, {Marcelo V.}",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 18th IEEE International Conference on Industrial Informatics, INDIN 2020 ; Conference date: 21-07-2020 Through 23-07-2020",

year = "2020",

month = jul,

day = "20",

doi = "10.1109/INDIN45582.2020.9442180",

language = "English",

series = "IEEE International Conference on Industrial Informatics (INDIN)",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "587--591",

booktitle = "Proceedings - 2020 IEEE 18th International Conference on Industrial Informatics, INDIN 2020",

address = "United States",

}

Caiza, G, Chiliquinga, S, Manzano, S & Garcia, MV 2020, Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation. in Proceedings - 2020 IEEE 18th International Conference on Industrial Informatics, INDIN 2020., 9442180, IEEE International Conference on Industrial Informatics (INDIN), vol. 2020-July, Institute of Electrical and Electronics Engineers Inc., pp. 587-591, 18th IEEE International Conference on Industrial Informatics, INDIN 2020, Virtual, Warwick, United Kingdom, 21/07/20. https://doi.org/10.1109/INDIN45582.2020.9442180

Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation. / Caiza, Gustavo; Chiliquinga, Santiago; Manzano, Santiago et al.
Proceedings - 2020 IEEE 18th International Conference on Industrial Informatics, INDIN 2020. Institute of Electrical and Electronics Engineers Inc., 2020. p. 587-591 9442180 (IEEE International Conference on Industrial Informatics (INDIN); Vol. 2020-July).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation

AU - Caiza, Gustavo

AU - Chiliquinga, Santiago

AU - Manzano, Santiago

AU - Garcia, Marcelo V.

PY - 2020/7/20

Y1 - 2020/7/20

N2 - The aim of this research is to design and implement an SDN-IoT testbed, which shows the influence that Software-Defined Networks (SDN) have on the applications of IoT applied to industry 4.0. The IoT-SDN architecture is considered as the basis for the SDN-IoT testbed implementation. The testbed architecture design has three layers: process layer, SDN layer, and IoT application layer. In the process layer, two Industry 4.0 based processes are implemented. In the SDN layer two access points are implemented, a switch, an SDN controller and a firewall application for centralized control of traffic over the network, finally in the layer of IoT application implements a graphical interface that allows to control and monitor the processes of industry 4.0. In the implementation of the SDN, low cost and free code elements are used that are configured to work with the OpenFlow protocol.

AB - The aim of this research is to design and implement an SDN-IoT testbed, which shows the influence that Software-Defined Networks (SDN) have on the applications of IoT applied to industry 4.0. The IoT-SDN architecture is considered as the basis for the SDN-IoT testbed implementation. The testbed architecture design has three layers: process layer, SDN layer, and IoT application layer. In the process layer, two Industry 4.0 based processes are implemented. In the SDN layer two access points are implemented, a switch, an SDN controller and a firewall application for centralized control of traffic over the network, finally in the layer of IoT application implements a graphical interface that allows to control and monitor the processes of industry 4.0. In the implementation of the SDN, low cost and free code elements are used that are configured to work with the OpenFlow protocol.

KW - Internet of Things (IoT)

KW - Low-cost automation

KW - OpenFlow

KW - Software-Defined Networks (SDN)

UR - http://www.scopus.com/inward/record.url?scp=85111124498&partnerID=8YFLogxK

U2 - 10.1109/INDIN45582.2020.9442180

DO - 10.1109/INDIN45582.2020.9442180

M3 - Conference contribution

AN - SCOPUS:85111124498

T3 - IEEE International Conference on Industrial Informatics (INDIN)

SP - 587

EP - 591

BT - Proceedings - 2020 IEEE 18th International Conference on Industrial Informatics, INDIN 2020

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 18th IEEE International Conference on Industrial Informatics, INDIN 2020

Y2 - 21 July 2020 through 23 July 2020

ER -

Caiza G, Chiliquinga S, Manzano S, Garcia MV. Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation. In Proceedings - 2020 IEEE 18th International Conference on Industrial Informatics, INDIN 2020. Institute of Electrical and Electronics Engineers Inc. 2020. p. 587-591. 9442180. (IEEE International Conference on Industrial Informatics (INDIN)). doi: 10.1109/INDIN45582.2020.9442180

Software-Defined Network (SDN) Based Internet of Things within the context of low-cost automation

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this