Estimation and Comparison of SOC in Batteries Used in Electromobility Using the Thevenin Model and Coulomb Ampere Counting

Diego Salazar, Marcelo Garcia

Research output: Contribution to journalArticlepeer-review

10 Scopus citations

Abstract

Nowadays, due to the increasing use of electric vehicles, manufacturers are making more and more innovations in the batteries used in electromobility, in order to make these vehicles more efficient and provide them with greater autonomy. This has led to the need to evaluate and compare the efficiency of different batteries used in electric vehicles to determine which one is the best to be implemented. This paper characterises, models and compares three batteries used in electromobility: lithium-ion, lead-acid, and nickel metal hydride, and determines which of these three is the most efficient based on their state of charge. The main drawback to determine the state of charge is that there are a great variety of methods and models used for this purpose; in this article, the Thévenin model and the Coulomb Count method are used to determine the state of charge of the battery. When obtaining the electrical parameters, the simulation of the same is carried out, which indicates that the most efficient battery is the Lithium-ion battery presenting the best performance of state of charge, reaching 99.05% in the charging scenario, while, in the discharge scenario, it reaches a minimum value of 40.68%; in contrast, the least efficient battery is the lead acid battery, presenting in the charging scenario a maximum value of 98.42%, and in the discharge scenario a minimum value of 10.35%, presenting a deep discharge. This indicates that the lithium-ion battery is the most efficient in both the charge and discharge scenarios, and is the best option for use in electric vehicles. In this paper, it was decided to use the Coulomb ampere counting method together with the Thévenin equivalent circuit model because it was determined that the combination of these two methods to estimate the SOC can be applied to any battery, not only applicable to electric vehicle batteries, but to battery banks, BESS systems, or any system or equipment that has batteries for its operation, while the models based on Kalman, or models based on fuzzy mathematics and neural networks, as they are often used and are applicable only to a specific battery system.

Original languageEnglish
Article number7204
JournalEnergies
Volume15
Issue number19
DOIs
StatePublished - Oct 2022

Bibliographical note

Publisher Copyright:
© 2022 by the authors.

Keywords

  • electric batteries
  • electromobility
  • lead acid
  • lithium-ion
  • nickel metal hydride
  • state of charge

Fingerprint

Dive into the research topics of 'Estimation and Comparison of SOC in Batteries Used in Electromobility Using the Thevenin Model and Coulomb Ampere Counting'. Together they form a unique fingerprint.

Cite this