Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles

Claudio Cordova; Fredy Llulluna; Juan Sinchi; David Pachacama; Darwin Pachacama

doi:10.11159/icmie21.121

Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles

Claudio Cordova, Fredy Llulluna, Juan Sinchi, David Pachacama, Darwin Pachacama

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This research carries out the dynamic analysis of light and semi-light automotive convergence diagnostic equipment, with a gross weight of up to three tons. A comparative analysis of the implications and consequences due to positive, negative, and neutral convergences is carried out. Then the different mechanical and electronic design characteristics of the device to determine the convergence in the tires. The design of the equipment has three stages: mechanical, electrical, and electronic. The mechanical stage comprises the structure of the equipment, the electrical stage consisting of the design and construction of a longitudinal motion sensor, The electronic stage formed by a microcontroller which, once the microprocessor has been programmed, performs the measurement process based on the variables: relative displacement and potential difference. The elements designed and built are integrated into the equipment, which through a test protocol was evaluated both in empty and under load.

Original language	English
Title of host publication	Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021
Editors	Huihe Qiu, Yuwen Zhang
Publisher	Avestia Publishing
ISBN (Print)	9781927877616
DOIs	https://doi.org/10.11159/icmie21.121
State	Published - 2021
Externally published	Yes
Event	7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021 - Virtual, Online Duration: 2 Aug 2021 → 4 Aug 2021

Publication series

Name	Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering
ISSN (Electronic)	2369-8136

Conference

Conference	7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021
City	Virtual, Online
Period	2/08/21 → 4/08/21

Bibliographical note

Publisher Copyright:
© 2021, Avestia Publishing. All rights reserved.

Keywords

alignment
automotive
convergence
dynamic
electromechanical

Access to Document

10.11159/icmie21.121

Cite this

Cordova, C., Llulluna, F., Sinchi, J., Pachacama, D., & Pachacama, D. (2021). Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles. In H. Qiu, & Y. Zhang (Eds.), Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021 (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering). Avestia Publishing. https://doi.org/10.11159/icmie21.121

Cordova, Claudio ; Llulluna, Fredy ; Sinchi, Juan et al. / Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles. Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021. editor / Huihe Qiu ; Yuwen Zhang. Avestia Publishing, 2021. (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering).

@inproceedings{dd7eef443c1a4e4ca8cb29372eee859f,

title = "Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles",

abstract = "This research carries out the dynamic analysis of light and semi-light automotive convergence diagnostic equipment, with a gross weight of up to three tons. A comparative analysis of the implications and consequences due to positive, negative, and neutral convergences is carried out. Then the different mechanical and electronic design characteristics of the device to determine the convergence in the tires. The design of the equipment has three stages: mechanical, electrical, and electronic. The mechanical stage comprises the structure of the equipment, the electrical stage consisting of the design and construction of a longitudinal motion sensor, The electronic stage formed by a microcontroller which, once the microprocessor has been programmed, performs the measurement process based on the variables: relative displacement and potential difference. The elements designed and built are integrated into the equipment, which through a test protocol was evaluated both in empty and under load.",

keywords = "alignment, automotive, convergence, dynamic, electromechanical",

author = "Claudio Cordova and Fredy Llulluna and Juan Sinchi and David Pachacama and Darwin Pachacama",

note = "Publisher Copyright: {\textcopyright} 2021, Avestia Publishing. All rights reserved.; 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021 ; Conference date: 02-08-2021 Through 04-08-2021",

year = "2021",

doi = "10.11159/icmie21.121",

language = "English",

isbn = "9781927877616",

series = "Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering",

publisher = "Avestia Publishing",

editor = "Huihe Qiu and Yuwen Zhang",

booktitle = "Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021",

}

Cordova, C, Llulluna, F, Sinchi, J, Pachacama, D & Pachacama, D 2021, Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles. in H Qiu & Y Zhang (eds), Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021. Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, Avestia Publishing, 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021, Virtual, Online, 2/08/21. https://doi.org/10.11159/icmie21.121

Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles. / Cordova, Claudio; Llulluna, Fredy; Sinchi, Juan et al.
Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021. ed. / Huihe Qiu; Yuwen Zhang. Avestia Publishing, 2021. (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles

AU - Cordova, Claudio

AU - Llulluna, Fredy

AU - Sinchi, Juan

AU - Pachacama, David

AU - Pachacama, Darwin

PY - 2021

Y1 - 2021

N2 - This research carries out the dynamic analysis of light and semi-light automotive convergence diagnostic equipment, with a gross weight of up to three tons. A comparative analysis of the implications and consequences due to positive, negative, and neutral convergences is carried out. Then the different mechanical and electronic design characteristics of the device to determine the convergence in the tires. The design of the equipment has three stages: mechanical, electrical, and electronic. The mechanical stage comprises the structure of the equipment, the electrical stage consisting of the design and construction of a longitudinal motion sensor, The electronic stage formed by a microcontroller which, once the microprocessor has been programmed, performs the measurement process based on the variables: relative displacement and potential difference. The elements designed and built are integrated into the equipment, which through a test protocol was evaluated both in empty and under load.

AB - This research carries out the dynamic analysis of light and semi-light automotive convergence diagnostic equipment, with a gross weight of up to three tons. A comparative analysis of the implications and consequences due to positive, negative, and neutral convergences is carried out. Then the different mechanical and electronic design characteristics of the device to determine the convergence in the tires. The design of the equipment has three stages: mechanical, electrical, and electronic. The mechanical stage comprises the structure of the equipment, the electrical stage consisting of the design and construction of a longitudinal motion sensor, The electronic stage formed by a microcontroller which, once the microprocessor has been programmed, performs the measurement process based on the variables: relative displacement and potential difference. The elements designed and built are integrated into the equipment, which through a test protocol was evaluated both in empty and under load.

KW - alignment

KW - automotive

KW - convergence

KW - dynamic

KW - electromechanical

UR - http://www.scopus.com/inward/record.url?scp=85139009862&partnerID=8YFLogxK

U2 - 10.11159/icmie21.121

DO - 10.11159/icmie21.121

M3 - Conference contribution

AN - SCOPUS:85139009862

SN - 9781927877616

T3 - Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering

BT - Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021

A2 - Qiu, Huihe

A2 - Zhang, Yuwen

PB - Avestia Publishing

T2 - 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021

Y2 - 2 August 2021 through 4 August 2021

ER -

Cordova C, Llulluna F, Sinchi J, Pachacama D, Pachacama D. Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles. In Qiu H, Zhang Y, editors, Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021. Avestia Publishing. 2021. (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering). doi: 10.11159/icmie21.121

Dynamic Analysis of a Convergence Diagnostic Equipment for Preventive Maintenance in Light Vehicles

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this