Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist

Luis M. Aguilar; Juan P. Torres; Christian R. Jimenes; Diego R. Cabrera; Miguel F. Cardenas; Patricio F. Urgirles

doi:10.1109/Chilecon.2015.7400376

Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist

Luis M. Aguilar, Juan P. Torres, Christian R. Jimenes, Diego R. Cabrera, Miguel F. Cardenas, Patricio F. Urgirles

Research output: Contribution to conference › Paper

5 Scopus citations

Abstract

© 2015 IEEE. This paper shows the analysis of the angles in the hip, knee and ankle. In a complete cycle of pedaling, are obtained the superior values, following a protocol totally specified in the document. Through the use of an acquisition software, named Kinovea®. The data of each one of the angles are set; in this manner the data information can be exported to Matlab®. In Matlab® Software the analysis of the results is performed with each one of the test subjects. With the obtained results, the analysis is performed with the correlation factor. The correlation factors obtained in the hip and knee are greater than 0.75, meanwhile the values obtained in the ankle are oscillating between 0.2 and 0.4. All this analysis was performed with the patron subject as a reference. The patron subject is a cyclist who has national and international championships.

Original language	English
Pages	205-208
Number of pages	4
DOIs	https://doi.org/10.1109/Chilecon.2015.7400376
State	Published - 4 Feb 2016
Event	CHILECON 2015 - 2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, Proceedings of IEEE Chilecon 2015 - Santiago, Chile Duration: 28 Oct 2015 → 30 Oct 2015

Conference

Conference	CHILECON 2015 - 2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, Proceedings of IEEE Chilecon 2015
Abbreviated title	CHILECON 2015
Country/Territory	Chile
City	Santiago
Period	28/10/15 → 30/10/15

Access to Document

10.1109/Chilecon.2015.7400376

Cite this

Aguilar, L. M., Torres, J. P., Jimenes, C. R., Cabrera, D. R., Cardenas, M. F., & Urgirles, P. F. (2016). Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist. 205-208. Paper presented at CHILECON 2015 - 2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, Proceedings of IEEE Chilecon 2015, Santiago, Chile. https://doi.org/10.1109/Chilecon.2015.7400376

Aguilar, Luis M. ; Torres, Juan P. ; Jimenes, Christian R. et al. / Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist. Paper presented at CHILECON 2015 - 2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, Proceedings of IEEE Chilecon 2015, Santiago, Chile.4 p.

@conference{a891cfe9f34e4b3da357296b1904bfc6,

title = "Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist",

abstract = "{\textcopyright} 2015 IEEE. This paper shows the analysis of the angles in the hip, knee and ankle. In a complete cycle of pedaling, are obtained the superior values, following a protocol totally specified in the document. Through the use of an acquisition software, named Kinovea{\textregistered}. The data of each one of the angles are set; in this manner the data information can be exported to Matlab{\textregistered}. In Matlab{\textregistered} Software the analysis of the results is performed with each one of the test subjects. With the obtained results, the analysis is performed with the correlation factor. The correlation factors obtained in the hip and knee are greater than 0.75, meanwhile the values obtained in the ankle are oscillating between 0.2 and 0.4. All this analysis was performed with the patron subject as a reference. The patron subject is a cyclist who has national and international championships.",

author = "Aguilar, {Luis M.} and Torres, {Juan P.} and Jimenes, {Christian R.} and Cabrera, {Diego R.} and Cardenas, {Miguel F.} and Urgirles, {Patricio F.}",

year = "2016",

month = feb,

day = "4",

doi = "10.1109/Chilecon.2015.7400376",

language = "English",

pages = "205--208",

note = "2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, CHILECON 2015 ; Conference date: 28-10-2015 Through 30-10-2015",

}

Aguilar, LM, Torres, JP, Jimenes, CR, Cabrera, DR, Cardenas, MF & Urgirles, PF 2016, 'Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist', Paper presented at CHILECON 2015 - 2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, Proceedings of IEEE Chilecon 2015, Santiago, Chile, 28/10/15 - 30/10/15 pp. 205-208. https://doi.org/10.1109/Chilecon.2015.7400376

Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist. / Aguilar, Luis M.; Torres, Juan P.; Jimenes, Christian R. et al.
2016. 205-208 Paper presented at CHILECON 2015 - 2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, Proceedings of IEEE Chilecon 2015, Santiago, Chile.

Research output: Contribution to conference › Paper

TY - CONF

T1 - Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist

AU - Aguilar, Luis M.

AU - Torres, Juan P.

AU - Jimenes, Christian R.

AU - Cabrera, Diego R.

AU - Cardenas, Miguel F.

AU - Urgirles, Patricio F.

PY - 2016/2/4

Y1 - 2016/2/4

N2 - © 2015 IEEE. This paper shows the analysis of the angles in the hip, knee and ankle. In a complete cycle of pedaling, are obtained the superior values, following a protocol totally specified in the document. Through the use of an acquisition software, named Kinovea®. The data of each one of the angles are set; in this manner the data information can be exported to Matlab®. In Matlab® Software the analysis of the results is performed with each one of the test subjects. With the obtained results, the analysis is performed with the correlation factor. The correlation factors obtained in the hip and knee are greater than 0.75, meanwhile the values obtained in the ankle are oscillating between 0.2 and 0.4. All this analysis was performed with the patron subject as a reference. The patron subject is a cyclist who has national and international championships.

AB - © 2015 IEEE. This paper shows the analysis of the angles in the hip, knee and ankle. In a complete cycle of pedaling, are obtained the superior values, following a protocol totally specified in the document. Through the use of an acquisition software, named Kinovea®. The data of each one of the angles are set; in this manner the data information can be exported to Matlab®. In Matlab® Software the analysis of the results is performed with each one of the test subjects. With the obtained results, the analysis is performed with the correlation factor. The correlation factors obtained in the hip and knee are greater than 0.75, meanwhile the values obtained in the ankle are oscillating between 0.2 and 0.4. All this analysis was performed with the patron subject as a reference. The patron subject is a cyclist who has national and international championships.

UR - https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84964866395&origin=inward

UR - https://www.scopus.com/inward/citedby.uri?partnerID=HzOxMe3b&scp=84964866395&origin=inward

U2 - 10.1109/Chilecon.2015.7400376

DO - 10.1109/Chilecon.2015.7400376

M3 - Paper

SP - 205

EP - 208

T2 - 2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, CHILECON 2015

Y2 - 28 October 2015 through 30 October 2015

ER -

Aguilar LM, Torres JP, Jimenes CR, Cabrera DR, Cardenas MF, Urgirles PF. Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist. 2016. Paper presented at CHILECON 2015 - 2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, Proceedings of IEEE Chilecon 2015, Santiago, Chile. doi: 10.1109/Chilecon.2015.7400376

Analysis of the angles in hip, knee and ankle during the pedaling of a Cross Country Olympic cyclist

Abstract

Conference

Access to Document

Other files and links

Cite this